Illustrative sample data. These are fictional businesses and figures, not live customer records or measured results.

Quality without the complexity

Build smart quality checks, catch defects early, manage inspections, and keep production moving without adding unnecessary complexity.

Quality Dashboard
Quality dashboard
Non-Conformance

Track every quality defect to closure

From inspections, production, or customer complaints — every defect gets an NC record, a severity, and a disposition, from raising it through closure.

Non-Conformance

Track every quality defect through disposition and closure — from inspections, production, or complaints.

Non-conformance management

Severity levels

Minor, Major, and Critical — Critical indicates a customer safety risk, recall, or shipment hold.

Root-cause methods

Use 5 Whys, Fishbone (Ishikawa), 8D, or Pareto — whichever method fits the problem.

Full traceability

Every NC links to the CAPA, inspection, and shipment from which it originated.

CAPA

Corrective & Preventive Action

Drive every non-conformance to a verified, effective fix — root cause, action items, verification, and closure. Do not just fix it once; make sure it never happens again.

CAPA — Corrective & Preventive Action

Drive every non-conformance to a verified, effective fix — root cause, action items, verification, and closure.

CAPA corrective and preventive action

Built-in root-cause methods

5 Whys — ask why repeatedly (usually five times) to trace a defect back to its true cause.

Fishbone (Ishikawa) — map causes across Machine, Material, Method, People, Measurement, and Environment.

8D — use an eight-discipline process for major customer complaints and export shipments.

Pareto — rank defects by frequency so you address the biggest problem first.

CAPA lifecycle

1Raise NC
2Containment action
3Root-cause analysis
4Open CAPA and assign an owner
5Corrective action
6Preventive action
7Effectiveness verification
8QA approval and closure
AQL Sampling

ISO 2859-1 acceptance sampling

Enter the lot size, AQL, and inspection level — the calculator gives you the sample size and acceptance and rejection numbers. Suitable for buyer audits by H&M, Zara, Primark, Walmart, and Target.

AQL Sampling (ISO 2859-1)

Acceptance sampling for buyer audits — lot size + AQL + level → sample size and acceptance/rejection.

AQL sampling based on ISO 2859-1

Worked example

Lot size

1,200 pcs

Sample size

80 pcs

Accept / Reject

10 / 11

Defects found

6 → PASS

Six defects among 80 samples are within the acceptance number of 10, so the lot passes and ships. If defects reach the rejection number (11 or more), the lot fails and an NC and CAPA are raised automatically.

SPC — Early Warning System

Catch drift before it becomes a defect

Statistical Process Control monitors your process while production is running — not only the finished product. Use individual and moving-range charts plus process capability (Cp/Cpk) from QC readings.

SPC — Statistical Process Control

Individual and moving-range control charts and process capability (Cp/Cpk) from QC readings.

SPC statistical process control

Cp / Cpk

Cp shows process width versus specification. Cpk shows whether the process is centered — below 1 means it needs attention.

UCL / LCL vs USL / LSL

Statistical control limits differ from customer specification limits — SPC monitors both.

Out-of-control alerts

When a reading crosses a control limit, production stops for investigation before parts are rejected.

One system, zero repeat defects

NC, CAPA, AQL, and SPC are connected — a failed inspection raises an NC, an NC opens a CAPA, and SPC prevents the next defect before it starts.

1. Inspect

A QC inspection or AQL sample identifies a defect.

2. Raise NC

The non-conformance is recorded with its severity and source.

3. CAPA

The root cause is found and corrective and preventive actions are assigned.

4. SPC monitoring

The process is monitored so the same defect cannot recur.

See all features

One need, one app.

Expand as you grow.

Manufacturing

Manage production checks

Inventory

Inspect receipts and deliveries

PLM

Improve engineering quality

See all Apps

Unleash
your growth potential

Start now